pxi 1031 error when using PXI 4132
Hello, I'm trying to use my old PXI-1031 as chassis for my PXI- 4132 SMU but i have problem on +12v supply from chassis.Is PXI-4132 compatible with PXI- 1031? Additional to that I'm using PXI- 8196...
View ArticleFrequency modulation in FPGA
I wanted to generate a trigonometric signal with frequency as function of time in the code that will run on LabView FPGA PXIe 5641R. Can someone help me in this regard?
View ArticleSystem Configuration API Firmware Query
I have a customer that needs to query all PXI(e) modules in a chassis for firmware revision information if available. This is for hardware inventory, tracking, and debugging purposes across 10's to...
View ArticleLinux slot assignment
Is there a way to find out what the layout of cards are in a chassis, what is in slot X? nilsdev doesn't show all the cards and has some of the slot info as 0xffffffff.
View Articlepxi-1042 hardware switch in boot options
I have a PXI-1042 chassis that runs WinXP and LabVIEW RT. For some reason is started booting XP unless I change boot settings in BIOS every time I trurn the PXI on. One of the boot options is a...
View ArticlePXI system installation
Hello everyone, I am having a PXI 1050 chasis with a PXI 8186 controller in it. I want to monitor thermocouple channels using SCXI 1328 modules. Can someone please provide me with...
View ArticlePXI crash down (DWarn: Internal error 2)
My PXI controller 8108 crashes after an undefined run time (typically about 1 h). After the crash down the communication to the PXI is interruped. Afterwards I could retreve the error log that you find...
View ArticleIs a PXI-8431 a non plug-and-play type module ?
Trying to install a PXI-8431 into a PXI-1044 chassis but the system doesn't seem to recognise it. Is a PXI-8431 a non plug-and-play type module ?
View Articlecreate project .exe
I am trying to create a standalone application by creating a project in LabView. I am using a PXI 1036, and following the instructions on the NI "building a standalone application" web page. It is...
View ArticleUsing TCP on the second ethernet interface
Hello,I'm using a PXI 8109 running Pharlap. I'm trying to use the second ethernet interface of my PXI to send UDP and TCP packets. The primary interface is used to manage Veristand Channels. Here is...
View ArticleWanted, PXI-4070
I know this is a stretch but does anyone have a PXI-4070 That they are willing to sell (operational of course) for < $1k? Thanks!
View ArticleHow to synchronize using TClock
Hi, I'm trying to synchronize a NI PXIe-6556 and a NI PXI-5406 together using TClock. I'm developing the software C# using the niHSDIO and niFGEN C# wrappers and the .NET 1.1.1 NI-SCOPE library which...
View Article5665 RFSA record timestamp
Hello, I have one 5665 RF Signal Analyzer and one 6682H timing module in PXI chassis. 6682H maintains its timebase from GPS. I am doing continuous IQ acquisition at 25M IQ rate, but I need accurate...
View ArticleI want replace Tektronix scope,Agilent Multiplier and Tek Function Generator...
I want to replace follwing Tektronix scope,Agilent Multiplier and Tek Function Generator with NI equivalent hardware.Tek Scope(DPO4034B) 350 MHz2.5/2.5/2.5 GS/s1/2/4 channels20M record...
View ArticlePXI - DAQmx tasks will not export to MAX 5.4
I am in the process of upgrading a PXI 1050 with an 8176 to an MXI bridge. The latest headache is that the CVI program had several DAQmx (tasks) defined in MAX 3.1.1 which will not export to MAX 5.4. I...
View ArticleProperties not Visible in MAX
I'm working on a PC that isn't connected to the Internet so it may be an old version of MAX. I have a NI-2627 switch that I need to change the topology of from 32x2 to 64x1. When I open MAX and...
View ArticlePXI 5652
The active light lit up solid red. Is there anything wrong with my connections?
View ArticlePXI-1036DC S1 switch - where?
Hi All! I have PXI-1036DC with PXI-6653 in the slot #2 (star trigger). I want to use 6653 10 MHz oscillator. As I understand , I must "manually switch S1 on the chassis backplane to enable or disable...
View ArticleError -1073807343 occurred at niDCPower Initialize With Channels.vi
Hi all,While initializing NI PXI-4130 power source I got the error "Error -1073807343 occurred at niDCPower Initialize With Channels.vi".The routine is in a sub VI already working since two years. No...
View ArticleHow can I power up the 8115 controller without using 1078 momentary contact...
I am using an 8115 controller installed in a PXIe-1078 chassis. I am rack mounting the system and I have numerous cables originating at the PXIe-1078 chassis that prevent me from using the front panel...
View Article
