NI MAX, Firewall Exception. PXIe-8381
Hello, My computer is connected to a PXIe-8381 (on a PXIe-1085 chassis) through a PCIe-8381 and its pertinent cable. Our application was not able to work until we allowed NI-MAX to be enabled by...
View ArticleNI real time .dll file
A .dll file is used in my project, when the project runs on my PC, it works well; but when I try to run it on my PXI, it warns that it can't find the dll file. I have already ftp it to location...
View ArticleNI DC Power: Events: Measure Complete event
Hello All, I would like to use the Measure Complete event as a trigger for external, bench top measurements). I can route the SMU trigger to my HSDIO and see it, but the max pulse width is 1.6us. Is...
View ArticleHow to use PXIe-5645 to read I/Q data
Hi all, I'd like to use PXIe-5645 receiver to read I/Q data. If it's possible to read the phase of I/Q signal directly, that would be the best. Otherwise I would use I/Q calculate the phase(tan(phase)...
View ArticleTB-2605
Hello to all, I am trying to use my 2503 multiplexer with the TB 2605. I have connected my wires to channels CH10+ and -, I can see it on NI max but I don't know how to configure the topology. Where do...
View ArticleDC Power Sequencing
I have a NI 4139 card and I wish to use the sequencing function. However I want to use a trigger input to iterate through the sequence rather than running the entire sequence 1 time. The sequence is an...
View ArticleFPGA Cloud Compile Service
I am unable to compile using the cloud compile server at the moment. The error I am getting is:NI-Farm: No worker has registered the given capability name. This is for a target I have used before...
View ArticlePXIe 1071 modules
Hello, it is possible to add to PXIe 1071 modules PXIe 4492, PXIe 6363, and PXIe 8301? The connection to the computer would be via PXIe 8301. Thank you
View ArticleClik here to view.
PXIe-4461 using chasis PXI CLK10 as reference clock
Hello,I'm working with a PXIe-1062q Chasis and a PXIe-4461 ADC. I'm trying to sample a senoidal signal.In Labview I9m using an example VI call "Continuos Output.vi". In this VI i'm having problems when...
View Articlepxi 6361 +5v Supply
bear with me....I have a cRIO controller with a digital output card (NI9476 switching 24VDC) that I would like to interface to a DAQ system via its PXI 6361 analogue input card (5VDC). All my PXI...
View ArticlePXI-8186 Hard Disk Upgrade
Hello everyone,We have an old system based on a PXI-8186 Series controller and its HD is almost full (9% left). I would like to upgrade to a larger HD but I'm not sure this is feasible.Has anyone done...
View ArticleClik here to view.
Modules not populating in LabView
Good Afternoon, I am currently getting a PXI system set up and I have been running into some small issues. I downloaded and installed all of the drivers for the PXIe-4080 and the PXIe-4112 devices that...
View ArticleWaveform generation using PXI hardware
I am trying to generate waveform and observe in CRO. there is no synchronization between the Lab VIEW waveform and waveform observed in CRO. There is a time delay. The CRO is completing waveform...
View ArticlePXIe-6592 not showing in Add Targets and Devices
I don't have the physical hardware yet, but plan to use the 6592R card for a current project. I was following these instructions for Adding an FPGA Target in the Local Development Computer. I opened...
View ArticlePXIe-2531 with TB2650
I'm looking at the pinout for the 2x VHDCI connectors on the TB2650, and it seems odd to me that the R0-R7 pins are available on both connectors. Generally, I'd think it would be preferable to have...
View ArticleNI PXIe-1065 update to Win 10 experiences
Hello, I would like to update an NI PXIe-1065 from Windows 7 to Windows 10.Has anyone done this before and can share the experience, procedure and tips on this?Thank you very much for your help. With...
View ArticlePXIe-1071 auto fan speed not working properly
Hello, I use the PXIe-1071 in a office. The fan speed switch is in the "auto" position.After power on the system, the fan speed is maximum and remains at its maximum.After the switch is manually...
View ArticlePXIe-8301 Controller thunderbolt issue - error code 31 PCI Express Upstream...
Hello guys,I recently installed a PXI system but I get an error code 31 at PCI Express Upstream Switch Port. I tryied this solution but it didn't work...
View Article