Clik here to view.
PXIe-6733 using chasis PXI CLK10 as reference clock
Hello,I'm working with a PXIe-1062q Chassis. I've connected a 10 Mhz reference signal in the rear panel "10 MHZ REF IN" of the chassis. How can I set up the PXI_CLK10 as the reference clock in the DAQ...
View ArticleHow do I cascade PXIe-2953 RF Mux?
My signal count and scope channels slightly exceed a single card. Is it possible to cascade RF MUX cards to increase capability? I know other vendor cards can do this, but would be nice to keep all...
View ArticlePXI 2520 Relay operating voltage
Hi allI have some queries related to PXI 2520 Relay: a. Maximum switching voltage (channel-to-channel) is given as 150V. Does it mean relay handles only DC Voltages or it is 150 Vrms ? E.g. can it...
View ArticlePXIe-4137 Current Pulse
Hi,I am trying to get the current pulse from PXIe-4137 output using NI DCPower SFP.The voltage pulse is working as I expect. I set 100mS on time and 200mS off time. I get right scope view.But current...
View ArticleCreating "consistent" source waveforms to burst together
I have run into a problem that seems very similar to one already posted two years ago. I am using a PXIe-6570 digital pattern instrument and I want to load two different source waveforms, each...
View ArticleNo switch simulated Ni-DAQmx
I have NI SWITCH installed but “switch” is not displayed as a device to simulate in NI-DAQmx. Compatibility, everything installed is version 20.0.
View ArticlePXIe Chassis Calibration - Necessary or Waste of Time?
We have a PXIe-1095 chassis that houses an NI PXIe-8880 controller, PXIe-4080 DMM, PXIe-5160 Oscilloscope, and 15 other PXIe modules. There are a total of 18 PXIe modules installed in this chassis and...
View ArticleSystem design PXIe-8840 + PXIe-6341 + PXIe-7971R + PXIe5782
Hello,I have some experience with LV, LV FPGA and cRIO, however I am a little bit confused with the system design for PXIe. The components are: PXIe-8840 controller, Analog/Digital I/O module...
View ArticleNI-motion 6.1
hi i want NI-motion driver 6.1.xIt's a very old version, but does anyone have it?i have to use pxi-7350 in window 10 (i'm using pxie-1073)in NI homepage, can download 6.1.2~5 but it need 6.1so someone...
View ArticleNI PXIe1071 Fan Replacement
Hi, I'm using NI PXIe-1071 and PXIe-8840 Controller. I am suffering from the fan noise so I decided to change the cooler. I bought Noctua A12x25 system cooler, which is quite famous for its low noise...
View ArticleDual Boot PXIe-8840 with installed Windows 10
Hello,I am completely new in the issue of OS PXI. I have PXIe-8840 with installed Windows 10. I need to install an RT OS. I would like to switch between WIN OS and RT OS as described here . However, I...
View ArticleClik here to view.
PXIe-4080 impact of using 5 1/2 digit vs 6 1/2 digit setting
Hi, I am using a PXIe-4080 to do multiple DMM reads of multiple signals and I noticed that there is a noticeable difference in execution speed when programming the DMM to use 5 1/2 digits versus 6 1/2...
View ArticleCreate De-Embedding Array RFSA
I keep getting a null array each attempt to Get De-embedding Array RFSA vi. I setup the center freq, both sig-gen and sig-an, initiate the setting but still a null array. I'm using the RFSA and RFSG...
View ArticlePXIe hardware for Acoustic Emission and TTL triggering
I was hoping to pick everyone's brains about the best options for some DAQ and triggering modules I wanted to procure. We are looking to synchronise the triggering/recording of the following...
View ArticlePXIe-6536 pinout
Where would I find the pinout for the PXI-6535? I have search the NI website. Thanks Paul
View ArticleClik here to view.
PXIe-1088 Chassis + PXIe-8301 + PXIe-2527 + PXI-2522 Combination Not Working
To any who may be able to assist, I am trying to configure the following combination of components to work together: PXIe-1088 Chassis, a PXIe-8301 remote controller, a PXIe-2527 multiplexer, and a...
View ArticleCurrent Loop Measurements Using PXIe-4492
Hey everyone, I am using a PXIe-4492 Sound and Vibration module to measure shaft vibration. I have the 640B01, 4-20 mA Velocity Transmitter which uses a current loop output. I have been trying to look...
View ArticlePXIe Camera Link card support on PXI
Hi, I'm currently using LV2021 RT to target a PXIe-8840 embedded controller running Phar Lap OS. Is the Camera Link frame grabber card PXIe-1435 supported on Phar Lap and is there a road map for the...
View ArticleHow to control PXI-1071 chassis with PC without a Remote Control Module?
Dear All, Is there a way to communicate with a PXi-1071 chassis with a computer but not having any ''conventional'' remote module? Unfortunately, an error happened in the order, so I received only a...
View ArticleFibre optic signal interfacing to PXI?
Hi there, Please suggest on the possibility of interfacing fibre optic directly to PXI modules. If yes, same may please be suggested. Thanks.
View Article