Can you use PXI-8231 for EtherCAT ?
Hi, just wondering if you can use the PXI-8231 to perform EtherCAT comms (as Slave), reason for asking is the CRIO seems to have specific EtherCAT modules, but PXI only has Ethernet, but as I...
View ArticlePXI-4130
Assume, I have a UUT that momentarily shuts off due to insufficient peak current from the PXI-4130. My UUT is rated for ~1.7A, 12V. The PXI-4130 is using the NI Auxiliary Power Source APS-4100 that...
View ArticleAccuracy/jitter when using software triggering of PXI card I/O
If using software timing/triggering for control of PXI I/O cards, is there any data (or at least rule of thumb) for how this affects jitter and cross-channel synchronisation? I expect there isn't a...
View ArticlePXI-RT Crashes on Starting about 50% of the time
I am developing a LabVIEW Real-Time program using LabVIEW 2020 for a client. The hardware configuration consists of two PXIe-1078 Chassis connected via PXIe-8364 (PXI-MXI). The first PXIe-1078 chassis...
View ArticleClik here to view.
Windows Update broke NI-DMM, NI-SWITCH, NI-DCPOWER drivers? What is going on.
Howdy all, Here's my story: 2/8/22 logged into the dev station to run a sequence. Everything fails. Open MAX and all instruments are showing outside of the PXI chassis, all exclamation marks and...
View ArticlePXI Multifunction I/O Module- Max update Rate vs. Settling time
I am comparing PXIe-6341 with max update rate of 900 KS/s and a Settling time of 6 µs with PXIe-6356 with a max update rate of 3.3 MS/s and a Settling time of 2 µs. First, how is the Settling time...
View ArticlePXI 4353 differential measurement?
Hello,I have the PXI 4353 DAQ card and would like to record temperature using TC4353 and thermocouples. Does the measurement system measure the voltage differentially so that I can also attach the...
View ArticleClik here to view.
4...20 mA measurement using PXIe-4302 and TB-4302C
Dear all, I'm planning to measure multiple analog current signals from different transducer using the PXIe-4302 with the TB-4302C. I found the pictures below in the two manuals of the devices but...
View ArticleInstall WIndows 10 on NI PXIe-8133 via a USB drive
I try to install Windows 10 on NI PXIe-8133 using a USB drive that contains Windows 10 software. I am stuck on NI PXIe-8133 BIOS, and how do tell PXIe-8133 to proceed with Windows 10 installation (see...
View ArticleClik here to view.
Some basic questions on the NI-Digital Pattern Instrument PXIe-6570
Hi NI Team, I've recently purchased the NI 6570 PXI module and I'm learning to use it now. The goal is to use the module to measure a device with an SPI interface. I've been reviewing some pages and...
View ArticleRecommended battery for powering PXI chassis
Hello, We need to be able to power a PXI chassis for acoustic measurements with no access to the mains network. Our preferred option is to power it using a low-cost battery and inverter, that is with...
View ArticleLabview 2013 Compatibility
Does anyone know which version of DaqMX is compatible with Labview 2013? I have Labview 2013 installed and all my hardware is recognized by DaqMX. When I set up soft front panels for my switch and DMM...
View ArticlePXI-6713 compatibility
HiCan anyone tell me if the PXI-6713 AO card is available with different backplane connectors? I have an old one bought some 15 years ago and it's gota full height PXI connector fitted. Looking on PXI...
View ArticleClik here to view.
PXI 4353 CJC NI VeriStand
Hi,i want to measure some temperatures with my PXI4353 module. Therefore i have a TC4353 terminal block, which normally has a built in CJC. In VeriStand i have to choose which CJC i want to take and...
View ArticleAI GND PXI-6378
Hii have a question concerning the different AI GNDs you can find in the device pinout of different PXI-modules. Are they all at the same potential or is there a difference? Are they shorted together?
View ArticlePCIe-8361 Version / Compatibility
I am trying to use a PCIe-8361, part number: 195315c-01L I do not see the device listed in the device manager. Many forum posts mention switching the DIP switch to mode 1 for bios compatibility, but...
View ArticleClik here to view.
PXI 2527 Pinout and Singal Matching
The information/datasheet page only has the following picture for pinout. The connector has 100 pins, but there are only 70 pins in this table. Can I have a more comprehensive pinout description table?...
View ArticlePXI Module Firmware updates
Does updating the firmware on a PXIe module effect the calibration coefficients stored on the module? I'm asking because we had to update the firmware on a module before our calibration system would...
View ArticleConexión motor synchors
Buenas tardes tengo un problema con la conexión de un motor synchors a la NI TB 4340, quiero saber cuáles son las 3 señales input y por donde alimento los 26 VAC 400Hz.
View Article