Error -1074135024 occurred at niFgen Initiate Generation.vi
Hi, I was calibrating a PXI 5124 with a NI-PXI-1042 when a error ocurred: Error -1074135024 occurred at niFgen Initiate Generation.vi at step Verify Main Analog Path OffsetInvalid value for parameter...
View ArticleClik here to view.
Install Windows onto PXIe-8133 (with real time operating system installed...
Hi all, I have a NI PXIe-8133 with a real time operating system (NI Real-Time PharLap 13.1). Now I want to install Windows onto it and make it dual-booting (I want to keep the original real time...
View ArticlePXI-6682 GPS coordinates...
Hi All! Can I obtain GPS coordinates from the PXI-6682 board? Jury
View ArticlePXI-4462 problem...
Hi All! I have PXI-1036 DC with 8101RT+6653+6682+4462. It seems thereis a problem with PXI-4462 driver:I format disk and install fresh system software (step by step). When I install DAQmx 9.7 with DSA,...
View ArticleHow to set a DMA transfer type for PXIe-6536 in LabWindows/CVI?
I have a PXI chassis PXIe-1078 with a controller PXIe-8115 running under Windows 7. The digital output board is PXIe-6536. I use a function DAQmxSetChanAttribute to set a property DAQmx_DO_DataXferMech...
View ArticleHow to use PXI_Clk10 witn PXI-4462?
Hi All! How can I use PXI_Clk10 instead onboard clock in PXI-4462? I try set sourse in DAQmx Timing -> Sample Clock -> Source. But the error is occured: property SampClk.Src not supported...
View ArticleUTC offset in PXI-6682
Hi! I set NiSync time reference to GPS. I create Future Time Event and use this event as a start trigger for PXI-4462. But I have a delay on 35 sec, i.e. on UTC offset. How can I generate my event on...
View ArticlePXI-4462 actual sample rate and delay...
Hi All! Is the DAQmx properties, which give me actual sample rate and filter delay? Or I must manualy calculate this values, as described in DSA manual? Jury
View ArticleIs NI PXI 8360 controller compatible with NI 1044 chassie
I am trying to intigrate NI 1044 chassie in to our system using NI PXI 8360 - PCI 8361.I am geting a solid red light as soon as i turn the chassie on NI PXI 8360 .I want to chech if this controller is...
View ArticleBasic of working with multi PXI devices?
Hi, I've tried to search, but havent found anything that satisfied me. Maybe anyone knows, what is the basic programming structure (in Labview) of working with multi pxi/pxie devices? For example, I...
View ArticlePXIe-8135 Displayport & USB
Hi, I hope to upgrade my current controller to PXIe-8135RT. My application requires me to have at least four display output (VGA, DVI or HDMI). So now, I have these questions: 1. Since the controller...
View ArticlePXIe-1065 Trigger lines
Hi all I'm trying to acquire data on 7 PXIe-6358 boards. All these boards are put in a PXIe-1065 chassis which is connecte to a RMC 8354 throught a MXI 8360. In order to synchronize all boards togethet...
View ArticlePXI-8156 Hard Drive Restore
I just acquired a PXI-8156 (not 8156B) controller with a failed and unrecoverable hard drive, so I replaced the hard drive with a suitable blank drive. Now I'm looking for a hard drive restore utility....
View ArticleNI PXIe-1073 Integrated MXIe supported laptops
Hi Everybody,i'm looking for a suitable laptop in the 500 EUR range to control 781162-01 NI PXIe-1073 Integrated MXIe, 5 Periph Slot, ExpressCard,3m Cable.I know that NI does not provode list of...
View ArticleFPGA derived clock
Hi, I'm trying to derive a 115 MHz clock from the PXI_CLK10 base clock on my 7953R module. The project says that the clock frequency is available and a valid configuration (mulitiplier is 23 and...
View Article2503
What function besides setting the topology do you use to control the BC01, BC02, BC23 relays? You are able to do it from the relay tab of the front panel.
View ArticleAny simple way to self-test FPGA card?
I'm attempting to create a simple self-test function for a populated 1042Q PXI chassis in LabVIEW. The DAQmx Self Test VI works for most of the cards, but a 7853R FPGA card is also present in the...
View ArticlePins in 9401 and 9425
Hi, i have both Modules NI 9401 and NI 9425, which I connect to an FPGA Card PXI-7813R through an Expansion Chassis. When connected, apart from the pins DI0 to DI31 (in NI 9425) and DI0 to DI7 (in NI...
View ArticlePXIe-4141 Calibration Error niDCpower version 1.8 ,"calibration function is...
Dear sir,Nice to meet you.When I running the PXIe-4141 Calibration Function "niDCPower Cal Adjust Voltage Leve.vi" in niDCpower version 1.8, it will show an error "calibration function is not supported...
View ArticleCalibration of PXIE cards
We currently calibrate several different PXI cards using the PXI-1052 chassis and now some of the engineers are upgrading to PXIE. Is there a way to configure my PXI-1052 chassis to allow for PXIE card...
View Article