PCIe-8361 Thunderbolt Compatibility
Is PCIe-8361 compatible with the Thunderbolt technology? Is there a chance PCIe-8361 board is going to work with Echo Express SE I (Thunderbolt 3 Edition) or similar product? My understanding was that...
View ArticlePXIe-7976R throughput
I am trying to understand the real throughput of NI PXIe-7976R (NI FlexRIO™ FPGA Module for PXI Express). On the product page it says K410T FPGA, 3.2 GB/s, 2 GB DRAM PXI FPGA Module for FlexRIOOn the...
View ArticlePXI chassis not showing in MAX after Windows Update
Hi, I'm having trouble with my PXIe chassis (PXIe1062Q with MXIe 8381 bridge). Yesterday everything was working fine: the chassis was showing in NI Max (17.5.0f0), code was running on the installed...
View ArticlePXI 8331 DAQmx version
Hello, What DAQmx version will work with the PCI/PXI 8331 card? I have DAQmx 17.0 and am having problems. Just making sure the driver supports the hardware. Thanks
View ArticleControlling and communicating with PXIe-8821 with external PC, precise timing
Hi all, I have a PXIe chassis with internal chassis controller and an analog input module (controller: PXIe-8821, AI module: PXIe-4302 with TB4302).I need to trigger data collection digitally, collect...
View ArticleXilinx FIR Compiler 7.2 configuring issue
Hello everyone,I am currently working on an oscilloscopic board (8CH - PXIe-5170R) provided with FPGA Kintex 7. I would like to add a FIR filter to process the incoming data, channel by channel, and I...
View Articleni pxi 5122
When we install the 5122 in our 1062Q chassis with a 8105 controller, we get a blue screen with the error " page fault in nonpaged area " and then it reboots. We were wondering if this is a problem...
View ArticlePXIe-6738 Current Drive Limit
The specifications for the PXIe-6738 shows the "Output current drive" is ±10 mA. Is that per-pin? What is the maximum for all 32 channels?
View ArticleClik here to view.
Acq_Regional_Clk Error - 1 Gbps Sampling with PXIe 6587
Hello out there, I have been trying to configure for 1 Gbps sampling for two weeks to no avail. FPGA training course has helped me write better FPGA code, but I still have the same problem whenever I...
View Articlewhat mean PLT LED on 8106 board
my 8106 not booting and no video and PLT LED on man board of 8106 is RED colorwhat is mean of PLT LED in 8106 main boardin normal state this LED was green colortnx
View ArticleWhere to find XP4/JP4 Male Right-Angle Connector for PXIe
We need to make PXIe to PCIe adapters for testing facility but couldn't find any XP4/JP4 right-angled male connector for it. XP3 has an ERNI P/N 204781 but ERNI told us that they don't have XP4...
View ArticleThe precision measurement temperature with help PXI-4071
I consider the variant of the measurement temperature with help PXI-4071.It is required the precision of measurement. I found into the specification the RTD with accuracy 0.14 and Termistor with...
View ArticleData bottleneck concerns
I have the following configuration setup for my application; and I need help to understand that this configuration will work when put together without having data bottleneck down-streamed to my PC. The...
View ArticleClik here to view.
PXI 2596, Outputs different simulation results with different Instrument Drivers
Hi all. I am using the PXI-2596. Basically, it is a Dual 6*1 multiplexer. I have used both the "NiSwitch Connect channels" API and Relay APIs to connect the channels. But both are behaving in a...
View ArticleMeasuring a high power signal
I'm trying to configure a system for a new project. One of the signals I need to measure is 3.3V, however, the signal also produces just over 6 Amp for 20 W of power. Can the PXI DAQ modules handle...
View ArticleACXX1553-3U-x-DS Driver issues with PXI-1045
Hi, Got the ACXX1553-3U-x-DS PXI card in an NI-1045 PXI chassis and after installing the AIM drivers on the PC, it flags up that the drivers weren't installed correctly. Device manager sees the card...
View Articlewhy am I seeing three ethernet ports for PXI
The PXI has only two ethernet ports but on NI_MAX it is showing me that it has three ports? I have attached the screenshot of the screen. Please help! FYIboth Host computer and PXI has ethercat drivers.
View ArticleShare trigger between PXIe-7972R and PXI-4461 on PXIe-1071 chassis
Hi All, We are using the PXIe-1071 chassis and PXIe-8840 controller, containing 2 modules:- NI PXIe-7972R connected to NI 5791- NI PXI-4461 We would like to share trigger between them, either from...
View ArticlePXIe-4331 Vch input impedance?
What is the input impedance of the Vch measurement amplifier?I am interested in measuring a very high (100M-ohm+) resistance full bridge and I'm concerned a typical 1M-ohm input impedance will load the...
View ArticleClik here to view.
How to use PXI 1002 with PXI 4472 as CDAQ
Hi, please help I would like to use my PXI 1002 with embedded controller NI PXI 8176 and with PXI 4472 as normal USB or Ethernet CDAQ.So I would like to run PXI with PC and Labview.I am not familiar...
View Article