The DisplayPort to DVI cable not working with PXIe-8135 RT
Hi all, I recently bought and installed the very beefy PXIe-8135 RT controller into my PXIe-1065 chassis and I am having mixed results with the DisplayPort video output. If I use the supplied...
View ArticleIs there anywhere I can find the step/guide to upgrading a NI PXI 8108 from...
Is there anywhere I can find the step/guide to upgrading a NI PXI 8108 from Windows XP to Windows 7? Also, do I have to be connected to the internet to do it or can I be offline? Thanks
View ArticleClik here to view.
ADLINK PXIe-3985 Controller - NI PXIe-1062Q Chassis Compatibility
Hello forum members! we recently purchased a PXIe-3985 ADLINK PXIe Embedded controller to be installed in a NI PXIe-1062Q PXIe chassis. In our system is also present a NI PXIe-6672 Timing Module,...
View ArticleClik here to view.
Synchronizing Analog and Digital Output
Hello everybody, as the title says, I want to synchronize a digital output with an analog output. I know that there is an LabView-example for this using counter channels. But I would like to know, if...
View Articlepeut-on faire fonctionner les cartes pxi-7334 et 6052E avec le controleur...
Bonjour à tous, J'ai un chassis PXI 8186 avec un controleur PXI 8186 sous Windows XP avec les tirroirs PXI 7334 et PXI6052E. Pour les besoins des projets, je doit l'utiliser connecter sur internet. Je...
View ArticleLetters of Volatility for PXI-8187 PXI-6562
I need to get Letters of Volatility for two PXI devices 8187 (2.5 GHz Pentium 4-M Embedded Controller for PXI) and 6562 (Digital Waveform Generator/Analyzer)
View ArticleNI PXI-PCIe 8361 card not detected
Hello Community, I am trying to get the following PXI system up and running on a computer running Windows 7 Enterprise 32-bit. We already have a duplicate system up and running on another computer...
View ArticleControl PXI devices via PyVisa?
Is it possible to control PXI devices via PyVisa in the same way as USB, and GPIB devices?
View ArticleDoes the 6674T also forwards the 2nd (3rd, etc) pulse?
Hey, I’m running a single USRP test where I transmit from one RF (say RF0) and received on the other RF. Timing synchronization of transmission/acquisition is performed though software by sending a PPS...
View ArticlePXI-5105 Re-Arm Time
I have a Lab-View GUI which is fetching data each time a User Interfacea Trigger level is exceed, the datasheet specified a minimum of 2.6us for Re-Arm.This re-arm is true always or sotware add more...
View ArticleUnknown channel or repeated capability name
Hello,I want to connect NI PXIe-5451(waveform generator) and NI PXIe-7966R(Flex RIO) with peer to peer technology. I took an example from NI FGEN, which is working perfectly, but when i use it in my...
View Articlecan we lock 80 MHz timebase to PXI_CLK10 on PXI-6220 M Series DAQ?
I am using PXI-6220 to measure Frequency/Period of 32768 Hz clock signal, accuracy is very important. I have provided signal to measure on Gate input of Ctr 0 (PFI 9). I am using 80 Mhz Timebase. I...
View ArticleDisconnected PXI locking up computer
I have an issue when an otherwise working PXI with PXI-5922 installed connected to a PCIe slot in my host computer by an optical cable. Everything works great if I boot up the computer with the chassis...
View ArticleAcquire single point 12 bit data @ 200Khz using PXIe 6535 DIO RT
I want to acquire single point 12 bit data @ 200Khz using PXIe 6535 DIO, PXIe 1072 chasis and 8820 controller in RT. Problem is I am unable to acquire data as triggered input. Loop execution time takes...
View ArticlePXI-6704 voltage output latency
I have on old PXI-6704 and I want to generate 1 channel, 1 sample voltage output. Everithng is working as expected exept for the output latency. I can see all samples are generated (the update rate...
View ArticleMXI connection issue
I'm using PCI-8331 and PXI-8331 to connect one PC which is running RT and one PXI chassis. The PXI chassis is powered on firstly and then the PC is powered on. The strange thing is that the LNK Led at...
View ArticleUp to which loop rate can PXIe 8820 Real-time controller reach ?
Hello, I was using PXIe8820 to do closed-loop control in labview real time. I take the measurement and give a control signal to actuators at each cycle.But I can't increase the loop rate up to 3kHz. Is...
View ArticlePXIe-5451 Digital Filter Interpolation
Hello,I'm using PXIe-5451 waveform generator with FPGA PXIe-7966R. They are connected with peer-to-peer technology.I want to use Digital Interoplation Filter, but there is an error occures in the...
View ArticlePXI-8461-2
Are there any known temperature problems with the PXI-8461-2 CAN interface? It looks like the CAN interfaces stop working when they become too warm.
View Article