Clik here to view.
generating signal from a .VCD file using NI-6541 HDSIO module
Good afternoon,My goal is to generate signal from a .VCD file (which originate from a VHDL modelsim simulation) with my HDSIO NI-6541 module. Here is what I have done:1) I used the Digital Waveform...
View ArticleNI PCI-4474 AnalogIn - self test failed in NI MAX STATUS CODE - 223044
Hello All, I am getting the following error in NI MAX --> Devices & Interfaces --> "The self test failed. Status Code: -223044. Internal Software Error occurred in DSA software....
View Article6674T Generate two clocks
Hello，I want to use one 6674T to Generate two clock, 10kHz and 120MHz. The clocks should phase locked to PXI_CLK10_IN. Acording to the manual, I think I can Generate one clock with its phase locked to...
View ArticleSynchronizing CANopen devices
Hello everybody, I have a PXI-8531 which is connected with 4 analogue transmitter moduls(Transmitter-Modul: http://www.microcontrol.net/fileadmin/maindownload/manual/hb_mcan_trs_v2r00_de.pdf). I use...
View ArticleChanging LabVIEW version on a PXIe-8133
Hello, I have just started using a PXIe-8133 that has been sitting in our lab for years. The device is still running alright without any issues, but I see that it has LabVIEW 2013 installed, and it is...
View ArticleHow do I downgrade firmware version of the mmRH-3608? (How to downgrade...
Hi ~I am looking for answers on how to downgrade a version of Lynx Firmware (mmRH-3608). I would really appreciate if I could get help. Let me explain my situation, I have three modules. 1)...
View Article关于PXIe 8820 外部触发
各位，我在1062机箱上，插了PXIe 8820主控，想使用8820外部触发功能，但是不知道如何才能得到“/PXIe_8820/TRIG_SMB”这个句柄，或者有其余方法利用外部触发功能吗？ 我查资料看到，PXI服务平台17.3才开始有“/PXIe_8820/TRIG_SMB”这个句柄，目前使用的是15.0，需要进行升级后才可以吗？ 希望得到大家的帮助，在此表示感谢！
View ArticleLabview NI 5734 Flex-RIO adaptor module for long time signal acquisition
Dear NI Team, I am using NI 1073 Chassis and NI7962R as a target device of Flex RIO for my project. I wanted to record a signal for at least 1 min using gettingstarted.lvproj example that I got from...
View ArticlePXI-GPIB Scan for Intruments grayed out
Current Hardware:PXI-8110PXI-GPIBCurrent Software:LabVIEW 18NI-488.2 17.6NI-VISA 17 I'm trying to connect devices to my PXI-GPIB card, but I cannot scan for instruments. The button is grayed out. The...
View Articlepxi-4130 python config causing output to turn on and off
I just got a new chassis and a PXI-4130 card. I have used python to set up the output here is my code import nidcpower#Configure the sessionwith...
View ArticleClik here to view.
When the next sampling clock comes, the DAQmx writing is not completed; it...
hello, everyone. I have connected the AMESim model at the rate of 1000hz to the AO0 of PXIe-6366, the AO rate of PXIe-6366 is the default value, then I tried to deploy the project, but it seems that...
View ArticleConnecting a PXI waveform generator to a PXI matrix switch
Hello, I'm trying to plan a test system which will include the PXIe-5413 Waveform Generator module. I'm planning to deploy the 2 channel version, but I have 24 channels I would like to test with this...
View ArticleClik here to view.
DC power error 225130 with 4112 and 1073 chassis; PC/sw related issue
Hello,We set up many PXI systems for production use but first time we are using the 4112 power supply. We have the following error message while trying the soft panel for a 4112(screen shot below). The...
View ArticleSolutions for voltage measurement on 500+ channels?
I would like put together a system with NI components that can measure the voltage on up to 500 different signals. I have limited bandwidth needs (10 MHz would be acceptable). I see that there is a...
View ArticleSolutions for voltage measurement on 80 channels using PXI-6225?
Hi everyone,I have the hardware to measure transient potential of total 80-channels (working electrodes are ion-selective electrodes) against 1 reference electrode (Ag/AgCl) using PXI-6225. I don't...
View ArticleCan I use PXI module(PXI-6722) and DAQmx(USB-6210) at the same time?
Hi, Now, I'm using the USB-6210 alone for 10-channel analog inputs. I want to make multi-channel analog output(at least 8 channels), then I found PXI analog output module(PXI-6722). As my experience,...
View ArticlePXIe 6368 noise floor
Hi allI am using PXIe 6368 card and am trying to calculate self noise of each channel in this card. For this purpose, i select a differential channel, set input range to +/-5 V, short both differential...
View ArticleThermocouple as analog input?
I would like to re-purpose an older M series NI PXI-6229 for reading J thermocouples. Before I spend time trying this out I thought I would ask the questions. Has anyone done this? Does it produce...
View ArticlePXI-1045 Daisy Chaining
Hi Everyone,I wanted to get confirmation that this will work and I am ordering the right parts.I am currently using a PXI-1045 chassis with an embedded SBC in Slot0. I need more PXI expansion slots...
View ArticleNI PXIe-8880 Controller Control the Panasonic Motor by EtherCAT
I have a PXI Platform with PXIe-8880 controller control the motor by EtherCAT. And it works well before!but now the software environment is broken, so I uninstall all of it. and i can't restore it...
View Article