What is the sense input impedance of the 4143 SMU
What are the impedances of the remote sense inputs of the 4143 SMU?
View ArticleShare clock PXI
Hello, I am trying to sync different modules to acquire 3 different signals. 1 signal is a strain gage connected to a TB4330, the second is a displacement sensor connected to another TB4330 (different...
View ArticleNo driver associated for PCI Device on pxi-8110
I have installed a new blank solid state hard drive on my pxi-8110. I then installed windows 7, which is NOT the operating system that originally come on the 8110. I then installed NIDAQ1450f0 When...
View ArticleHow to control PXI-1031 with PXI-8336 with MatLab?
We are trying to control a PXI-5922 mounted in a chassis PXI-1031 connected to a PC with a PXI-8336. We want to use MatLab. In the Test&Measurement Toolbox, you should be able to see the device....
View ArticlePXI-5152 noise when "active"
PXI gurus,I am running a particularly noise sensitive experiment and it seems that the PXI-5152 itself is generating noise whenever the active LED turns from green/yellow to off (temporarily). I wanted...
View ArticleSHB4X-B4X Cable Pinout
We will be using your SHB4X-B4X Infiniband cable to connect your PXIe-4492 to a custom PCB in a test panel. What I am looking for is the pinout of the SHB4X-B4X infiniband cable (197516-01) so I can...
View ArticleSHB4X-B4X and SHB12X-B12X Cable Pinouts
We will be using your SHB4X-B4X Infiniband cable to connect your PXIe-4492 to a custom PCB in a test panel. What I am looking for is the pinout of the SHB4X-B4X infiniband cable (197516-01) so I can...
View ArticleVI:FIFO limitation or restriction?
Hello guys. I am implementing a communication system with PXIe-7965 / NI-5791. The problem is element to read from FIFO.When I set 2048 BRAM as an input FIFO, it cause an overflow (not always but...
View ArticlePXI 8196 Ethernet port is not functioning
Hello, I have a PXI-8196 controller that won't connect to a network through the ehternet port. There aren't any status lights on the ethernet port at all. Any help would be much appreciated! Thanks,...
View ArticleWhere can I find pinouts for the 68 pin connectors on the PXIe-8430/8 and the...
We need to build new cables for the PXIe-8430/8 and 8431/8 serial interface cards.I cannot find pinout information for either of the 68 pin connectors on the front panel of these cards.Can someone...
View ArticleClik here to view.
NI DC Power Soft Front Panel Error - 200247
Hello All, I am having trouble opening the ni DC power soft front panel. The error message I repeatedly am seeing is below: When I try to run the vi mentioned in the error above, the same error...
View ArticleUsing Keysight M9037A Controller in a NI PXIe-1075 Chassis, need to add a...
Hello, I have a bit of an odd configuration and I was hoping someone could confirm whether or not the PXIe-8374 will fulfill my needs or not, and if there is some other product that will. Our master...
View ArticlePXI 5122, 5152 MIG harware error
I hadn't used the system in about a month, and came to find both of my PXI 5122 and 5152 cards stopped working at the same time, reporting Error -239021 occured at Self-TestPossible Reasons:Internal...
View ArticleClik here to view.
Channel General properties:Description
Hi, I am trying to identify my different input channels of the PXI I am using and I would like to use the "General Propertiesescription" field to do it. The problem seems to be really simple but I...
View ArticlePXIe deployment with errors
Hello, I have been trying to run a program on my PXIe-1065 without success. I think I may be missing a driver or software, especifically LabVIEW Real-Time module on the host and DAQmx on the target...
View ArticleEdge trigger of two PXI digitizers not right with tclk
I have two digitizing (scope) PXI modules (5114). Using the example niScope EX Multi-Device Configured Acquisition (TClk) I can sync the two scopes; however, the edge trigger doesn't seem to work. I...
View Articlewhat software do I need to run a VI on a PXIe-1065?
Hello, I want to run a VI on my PXIe-1065. So far believe I need to install DAQmx and LabVIEW Real-time module on both the host and target. Do I need something else?Also, is there a way of installing...
View ArticleWhat does 14 bit resolution mean
Hello, Does the "14 bit resolution" refer to the input given to the PXI-5412 (via niFgen_CreateWaveformFromFileI16 and/or niFgen_CreateWaveformFromFileF64), the output of the PXI-5412 through channel...
View ArticleClik here to view.
trigger multi chassis
I am adding a PXIe chassis with three FlexRIO FPGAs and digitzer adapter modules to an existing PXI chassis with timing and Multifunction DAQ cards.In this question I would like to focus on triggering...
View Article