PXI 6221
hi every body..can u help me..i want to measure voltage and current from plasma system. but i get problems with zero level signal, for information, i attach files due to my measurement
View ArticlePXI chassis 200m+ away; options?
Hey all. I have a couple PXI chassis located 200-300 meters away from my control center. Security issues prevent me from having anything with non-volatile memory inside the PXI chassis. We can argue...
View ArticlePXI-6704 AO Voltage Spike during Power Down
Current Setup: PXI 6704 connected to SCB68A. On one of the analog outputs, I have a motor (powered via 24 VDC and controlled by 0-5V via PXI 6704). During power up (powering up the PXI chassis), 0...
View Article6682 looses GPS
I have a NI PXI-6682 card in a PXI-1042 chassis with a PXI-8186 embedded controller. I have a startup.rtexe that runs on the controller. Recently I have been loosing my GPS time and possition....
View Articlewhat is the pinout of the 192568-1 cable
What is the ene to end pin out of the 192568-1 cable assembly. I am looking to see if the pin out lines up with the 16036 cable from Ballard
View ArticleHow is the cable (779956-01, 62 pin female to female DSUB for connecting the...
I plan to buy the cable(779956-01, 62 pin female to female DSUB ) for connecting the PXI-2568. Since both side of this cable are female. I want to know if this cable is pin1-pin1 mapped? or it is...
View ArticleADC control of NI adapter module
Hi, For NI adapter module like NI 5751, it have 16 analog input channel and each channel have a individually ADC. So my question is whether I can control each ADC seperately？ I just would like to let...
View ArticleDAQmx on recent Linux system
Hello,I use DAQmx on Linux. I am now moving from SL6 to a newer distribution for my new computers. I struggle to get DAQmx to install.If I try to install DAQmx straight, I get the following message:...
View ArticleNI PXI 2565 Cable Definition / PCB Definition Support
Hi, I currently have a NI PXI-2565 relay switch and was wondering what the best / recommend methods for connecting to this device with respect to the chasis and at a PCB. I am interested in what the...
View ArticlePXI 8184 system boots up - shows nothing on screen
Hi All, I recently found our NI PXI-8184 in our company and I wanted to test if we can use the device for our testing purposes.The first time, I got to its BIOS. I saw the system date was resetted to...
View Articlepxi arbitrary waveform generators compatible with the ssb generation vi
Need to use the SSB Generation vi, what Arb. Waveform Gens. will work for the PXI system? 54xx?
View Articlechannel emulator in NI 5792
Hi everyone, is it possible to create this channel emulator https://decibel.ni.com/content/docs/DOC-26423 using the NI 5792? Thank you. Best regards
View ArticleClik here to view.
channel emulator in NI 5792
Hi everyone, is it possible to use this channel emulator https://decibel.ni.com/content/docs/DOC-26423 in the NI 5792? Thanks a lot
View ArticleVideo frames mixed
Hi all, A test I'm working requires three HD cameras continuously recording different points. I manage to make a small program that records and visualizes the images but something quite strange...
View ArticleSynchronization - Master and Slave tasks.
For syncrhonisation (via hardware) of two modlues; one 4330 and 6361, shall I create one master task for the 4330 and then syncrhinise it with the 6361 module? Or create multiple channels say 5 from...
View Articlevideo speed
Hi,I'm playing video and saving to a avi file at the same time. Since saving the file is very time demanding I just do it in separate loops. I also cut the video files so I do not have problems with...
View ArticleSCXI 1314 Sampling rate
Hello, We are trying to collect strain gage information using the SCXI-1314 module. This is connected to an SCXI-1520 module mounted on SCXI-1000 which then reads into a LabView program to collect the...
View Articlepxi 8119 win32 to win64
Hello!Can I replace te Operating system for NI PXI-8119 from Windows7 32bit with 64bit variant?
View Articleremoving a PXI module from th ack
I need to send some PXI modules back for calibration but am unable to get the PXI modules out of the PXI rack and insteadof forcing these and potentially breaking them. I googled for how to remove the...
View ArticleSpecify Chassis Slot in Example Project
Hope this is the right location for this question: new user here, trying to get a PXI-5402 in a PXI-1031 up and running. I have used MAX, and the generator itself is working fine. But now I'm trying to...
View Article